As an Amazon Associate I earn from qualifying purchases.
UCTRONICS #ad - Extend powerline - deliver power to micro USB devices without nearby AC outlets and upgrade them to PoE Power over Ethernet from up to 400 feet. Support raspberry Pi 3b+ and previous models.
5v/2. 4a & 1000mbps - power micro-usb devices via an Ethernet cable, along with gigabit data transfer which you can put aside if you only need power. Replace power supply - remove the need for a separate power supply if the Ethernet cable is a must-have for your micro USB devices.
UCTRONICS #ad - If you received something other than a USB C connector, please contact us. Other type c uses: if you have a network device powered by usb-c router, etc. Ieee 802. 3at poe switches or injectors recommended for a larger power budget. Enhanced poe hat alternative: the official raspberry pi poe hat outputs 2.
5a maximum at 5v, but you might need 3A and above. Make full use of each port on your poe switch. Work with 802. 3af poe switches but will not output more than 2. 5a. Note: 1.
2. Raspberry pi 4 compatible: the latest raspberry pi model is powered via a usb-c port, but sometimes you just dislike the wall chargers, especially when you have multiple Pis running at the same time and the adapters eat and intrude your whole power strips. Poe to usb-c: poe signal adapted to usb-c power and ethernet connection.
ANVISION #ad - Output: 5v dc power out 5v 2. 4a 12watts max. Plug 3. 5mm x 1. 35mm, 5. 5mm x 2. 1mm, 10/100/1000mbps ethernet data. Application: works with non-poe network devices that require a 5V dc input and a ethernet input, such as IP camera and more.
DSLRKIT #ad - The poe splitter must be connected to the POE switch, POE midspan or 48V~52V POE injector for proper operation.
UCTRONICS #ad - Power output port: 5v 2. 4a micro usb Power Plug. 12 watt micro usb power over ethernet poe up to remote 328-492ft 100-150m via Ethernet cable, 802. 3af poe switch or 48v injector is needed. 2-pack: b07qprvM51. Support ieee 8203af poe switch, 48v injector.
ANVISION #ad - Application: works with non-poE network devices that require a 5V dc input with Type-C port and a ethernet input. Warranty: 2 years and unlimited technical support, Package content: 2x 5V gigabit PoE splitter.
REVOTECH #ad - 1500v high voltage isolation. Pd support 44v-57v voltage transmission, Automatically detects power supply from PSE power supply module. Support the isolation circuit protection, can effectively protect electrical equipment; Support the short circuit, overvoltage protection.
DSLRKIT #ad - If you have a v1 Bridge the DC socket is 5. 5×2. 1mm. 10/100mbps ethernet，compliant with IEEE802. 3af，with 2. 5kv isolation. 5. 5x2. 1mm dc plug active poe splitter，48V to 5V 2.
4a max. This poe splitter is suitable for household ip camera with DC 5V power as the kind in the photo of the instruction, it does not suit equipments with DC 12V power. 12watt. Please note that philips changed the size of the dc socket on the bridge.
UCTRONICS #ad - These are not included in our package. What else is needed - you need an ieee 802. 3af compliant poe switch or injector to serve as the PSE Power Source Equipment, an Ethernet cable with the proper length you need, and devices powered via micro USB. Reportedly used on micro usb devices like raspberry pi, wyze cam v2, chromecast, Nano Pi, ASUS Tinker Board, Amazon Cloud Cam, Amazon Ethernet Adapter for Fire TV, Arlo 2 Pro, Echo Dot 2nd Gen, and so on.
What is it - a 5v uctronics poe splitter to split the poe signal into micro usb power supply and ethernet in rj45, so that non-poe devices can be powered over Ethernet.
2: for one pack, check b01mdluse7; for gigabit poe switch or a raspberry Pi 3 B+, check Gigabit PoE splitter B07CNKX14C; For 12V barrel port, check B01MPWW2UV. Note - 1: just put the split ethernet aside if you don’t need the data. It makes full use of poe switches because the other end of the PoE port could be any micro USB devices instead of a 48V PoE network device. That means it adds plug-and-play poe support to raspberry pi models even they are not 3 B+ and cannot accommodate a Raspberry Pi PoE HAT.
PoE Texas #ad - This power over ethernet splitter converts and 'splits' 44-56v poE into 5 volts, 10 watts of power on its DC barrel with divided 10/100/1000 gigabit data capability on its RJ45 connector. 802. 3af power over ethernet poe splitter / converter for 5 volt non-PoE devices.
Expert help is only a phone call away. Requires an ieee 802. 3af poe switch or 802. 3af poe injector sold separately. Extend power up to 328 feet away from a PoE switch.
All poe texas products are backed by a one year replacement warranty and a 30 Day, no questions asked, return policy. Functions as a poe splitter for 5v devices while delivering lightning fast gigabit wired speeds on the RJ45 connector. 5v 10w poe splitter compatible with non-poe security cameras, Raspberry Pi, Tablets, dropcam, Smart Home Devices, foscam, Sonoff PTZ cam.
1. UCTRONICS
#adMost Micro USB Security Camera and Tablet, Micro USB Power and Ethernet to Raspberry Pi 3B+, Work with Echo Dot, IEEE 802.3af Compliant, UCTRONICS PoE Splitter Gigabit 5V
#ad5v/2. 4a & 1000mbps - power micro-usb devices via an Ethernet cable, along with gigabit data transfer which you can put aside if you only need power. Replace power supply - remove the need for a separate power supply if the Ethernet cable is a must-have for your micro USB devices.
More information #ad
Poe hat alternative - use no gpio pins. Compatible with Raspberry Pi case with fan or add-on screen. Note: an 802. 3af compliant poE injector/switch is required to use this device not included. Save your time - plug and play compatibility and quick seller response.| Brand | UCTRONICS #ad |
| Manufacturer | UCTRONICS #ad |
| Height | 1.97 Inches |
| Length | 3.15 Inches |
| Width | 0.59 Inches |
| Part Number | U515902 |
| Model | U515902 |
More information #ad
2. UCTRONICS
#adUCTRONICS USB-C PoE Splitter Gigabit, 802.3at Power Over Ethernet to USB Type-C Adapter, PoE to USB-C 5V/4A Power Supply for Raspberry Pi 4 and More
#ad5a maximum at 5v, but you might need 3A and above. Make full use of each port on your poe switch. Work with 802. 3af poe switches but will not output more than 2. 5a. Note: 1.
More information #ad
The 5v usb-c power is adapted from a 5. 5x2. 1mm barrel port, and you can adapt it to other ports if you get the right adapter. And you want to deliver power and transfer data with a single ethernet cable, or you’ve already had a PoE connection but want to use a USB-C 5V device with it, camera, this might be helpful for you, but it does NOT support QC or PD protocols.22. Raspberry pi 4 compatible: the latest raspberry pi model is powered via a usb-c port, but sometimes you just dislike the wall chargers, especially when you have multiple Pis running at the same time and the adapters eat and intrude your whole power strips. Poe to usb-c: poe signal adapted to usb-c power and ethernet connection.
| Brand | UCTRONICS #ad |
| Manufacturer | UCTRONICS #ad |
| Part Number | UCT_U5259 |
| Model | UCT_U5259 |
| Warranty | 6 Months |
More information #ad
3. ANVISION
#ad48V to 5V 2.4A Adapter, Plug 3.5mm x 1.35mm, for IP Camera and More, 5.5mm x 2.1mm Connector, IEEE 802.3af Compliant, ANVISION 2-Pack 5V Gigabit PoE Splitter
#adMore information #ad
Warranty: 2 years and unlimited technical support, Package content: 2x 5V PoE splitter. Plug and play: require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet. Input: ieee 802. 3af dc44-56v from poe switch or poe injector.| Brand | ANVISION #ad |
| Manufacturer | ANVISION INC #ad |
| Weight | 0.26 Pounds |
| Part Number | AV-PS05-G2 |
| Model | AV-PS05 |
More information #ad
4. DSLRKIT
#adDSLRKIT Gigabit USB Type C Active PoE Splitter 48V to 5V IEEE802.3af Power Over Ethernet for Raspberry Pi 4 4B
#adMore information #ad
| Brand | DSLRKIT #ad |
| Manufacturer | DSLRKIT #ad |
| Part Number | GType-C |
| Model | GType-C |
More information #ad
5. UCTRONICS
#adDropcam or Raspberry Pi 2/3B+ 48V to 5V 2.4A, UCTRONICS IEEE 802.3af Micro USB Active PoE Splitter Power Over Ethernet 48V to 5V 2.4A for Tablets
#adMore information #ad
Compatible with 44-57V DC voltage, overvoltage protection. Suitable for android tablets, dropcam, raspberry Pi – Micro USB. For gigabit poe switches users, 48v unsolicited Power Over Ethernet PoE Switch or Ethernet PoE Adapter, gigabit splitter U515902 is recommended.| Brand | UCTRONICS #ad |
| Manufacturer | UCTRONICS #ad |
| Height | 1.97 Inches |
| Length | 3.15 Inches |
| Width | 0.59 Inches |
| Part Number | UCT_U5159 |
| Model | U5159 |
More information #ad
6. ANVISION
#adANVISION 2-Pack 5V Gigabit PoE Splitter, USB Type C, 48V to 5V 2.4A Adaper, IEEE 802.3af Compliant
#adMore information #ad
Plug and play: require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet. Output: 5v dc power out 5v 2. 4a 12watts max. Plug usb type c, 10/100/1000Mbps ethernet data. Input: ieee 802. 3af dc44-56v from poe switch or poe injector.| Brand | ANVISION #ad |
| Manufacturer | ANVISION INC #ad |
| Part Number | AV-PS05-2 USBC |
| Model | AV-PS05 |
More information #ad
7. REVOTECH
#adGigabit PoE Splitter 12V 2A Output with IEEE 802.3af/at Standard Compliant 10,100,1000Mbps Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance 5.5x2.1mm DC Plug CablePS5712TG
#adMore information #ad
Transfer rate: 10/100/1000Mbps, IEEE 802. 3 x, standard: IEEE 802. 3 i, ieee 802. 3 u, ieee 802. 3 af/at. 12v 2a power output, easy to access Poe network for non-PoE terminal. Support international standard ieee802. 3 af & ieee802. 3at30w; poe port support 10/100/1000mbps data transmission.| Brand | REVOTECH #ad |
| Manufacturer | Revotech #ad |
| Height | 0.91 Inches |
| Length | 10.83 Inches |
| Weight | 0.22 Pounds |
| Width | 1.1 Inches |
| Part Number | PS5712TG |
| Model | PS5712TG |
More information #ad
8. DSLRKIT
#adDSLRKIT DC 5V 2.4A Active PoE Splitter Power Over Ethernet 802.3af 5.5x2.1mm
#ad4a max. This poe splitter is suitable for household ip camera with DC 5V power as the kind in the photo of the instruction, it does not suit equipments with DC 12V power. 12watt. Please note that philips changed the size of the dc socket on the bridge.
More information #ad
If you have a v2 Bridge the DC socket is 5. 5×2. 5mm, this splitter is not compatible. Some managed intelligent gigabit poe switches need to set the lan port of this connected splitter to Manual 100Mb/s mode in the management Settings of switches, such as the following switch, otherwise the power supply may work normally but the network connection will not work, HP 3500-48G-PoE yl Switch J8693A.| Brand | DSLRKIT #ad |
| Manufacturer | DSLRKIT #ad |
| Part Number | 5V-5.5*2.1 |
| Model | 5V-5.5*2.1 |
More information #ad
9. UCTRONICS
#adDropcam and Raspberry Pi 2/3, for Tablets, and More, UCTRONICS for Raspberry Pi PoE Splitter 5V 2-Pack, Active PoE to Micro USB Adapter, IEEE 802.3af Compliant
#adWhat is it - a 5v uctronics poe splitter to split the poe signal into micro usb power supply and ethernet in rj45, so that non-poe devices can be powered over Ethernet.
More information #ad
What’s special about it - poe to micro usb. What is poe - poe enables you to deliver power and data with a single ethernet cable, and thus fewer wall plugs are needed and fewer cables are messed. 3: the split ethernet cable does not carry power, but you can add a USB Ethernet adapter to it if your device takes network from USB. 2: for one pack, check b01mdluse7; for gigabit poe switch or a raspberry Pi 3 B+, check Gigabit PoE splitter B07CNKX14C; For 12V barrel port, check B01MPWW2UV. Note - 1: just put the split ethernet aside if you don’t need the data. It makes full use of poe switches because the other end of the PoE port could be any micro USB devices instead of a 48V PoE network device. That means it adds plug-and-play poe support to raspberry pi models even they are not 3 B+ and cannot accommodate a Raspberry Pi PoE HAT.
| Brand | UCTRONICS #ad |
| Manufacturer | UCTRONICS #ad |
| Height | 0.94 Inches |
| Length | 6.69 Inches |
| Width | 4.72 Inches |
More information #ad
10. PoE Texas
#adDropcam, USB, PoE Texas 802.3af Power Over Ethernet PoE Splitter with 5 Volts 10 Watts Output, for 5V Non-PoE Security Camera and Devices Like Foscam, Sonoff, Tablet, Raspberry Pi and Others
#adExpert help is only a phone call away. Requires an ieee 802. 3af poe switch or 802. 3af poe injector sold separately. Extend power up to 328 feet away from a PoE switch.
More information #ad
Please call 512 479 0317 for assistance. The 1. 35mm x 3. 5mm dc barrel fits most devices that use 5 volt power. Features opto-isolated power to protect your devices. All poe texas products are backed by a one year replacement warranty and a 30 Day, no questions asked, return policy. Functions as a poe splitter for 5v devices while delivering lightning fast gigabit wired speeds on the RJ45 connector. 5v 10w poe splitter compatible with non-poe security cameras, Raspberry Pi, Tablets, dropcam, Smart Home Devices, foscam, Sonoff PTZ cam.
| Brand | PoE Texas #ad |
| Manufacturer | PoE Texas #ad |
| Height | 1.5 Inches |
| Length | 2 Inches |
| Weight | 0.13 Pounds |
| Width | 0.75 Inches |
| Part Number | GAF-5v10w |
| Model | GAF-5v10w |
More information #ad
30-90% Disocunts Found!
We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?
Disclaimer: We earn small fee from purchases made on Amazon.
