Top 10 PWM Fan Controller 4 Pin – Computer Case Fans

As an Amazon Associate I earn from qualifying purchases.

1. Noctua

#ad

4-Pin PWM Fan Controller Black, Noctua NA-FC1

#ad
Noctua #ad - Compact, highly flexible controller for 4-pin PWM fans. Works as a manual speed reducer or in tandem with the automatic motherboard fan control: achieve truly quiet operation, even with high-speed PWM fans such as Noctua’s industrialPPC series. Includes a 3-way splitter cable for controlling up to 3 fans simultaneously. No stop” mode: prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors. 6-year manufacturer’s warranty.
BrandNoctua #ad
ManufacturerNoctua #ad
Height0.98 Inches
Length1.89 Inches
Weight50 Grams
Width0.83 Inches
Part NumberNA-FC1
ModelNA-FC1

2. SilverStone Technology

#ad

SilverStone Technology Silverstone 8-Port PWM Fan Hub/Splitter for 4-Pin & 3-Pin Fans in Black SST-CPF04-USA Newest Version

#ad
SilverStone Technology #ad - Support speed detection for accurately controlling fans. Included 3m adhesive to apply anywhere within your case. 1-to-8 pwm connectors. Attached 3 pin fans will run at maximum RPM. Pwm 4pin header x 8, compatible with 3pin cable Speed control function is unavailable for 3 pin fans. Compact size at only 54mm w x 19mm H x 40mm D. 2200μf capacitor provides stable voltage.
BrandSilverStone Technology #ad
ManufacturerSilverStone Technology #ad
Height1.57 Inches
Length2.13 Inches
Width0.75 Inches
Part NumberSST-CPF04-USA
ModelSST-CPF04-USA
Warranty1 Year Parts and Labor

3. Electop

#ad

Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller

#ad
Electop #ad - Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. The ten fans will spin at the same speed, the hub has a power source fed from the computer power supply, that designated by the system for that fan. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans.

In the hub interfaces, the red cpu interface is the cpu fan dedicated interface with speed detection function. So, then the speed is regulated by the speed for the "source" fan. Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces.

Please note 4pin fan speed can be adjusted by temperature control. For both 4-pin and 3-pin fans. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. You can connect to the CPU fan lead on the system board or the chassis fan lead. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.
BrandElectop #ad
ManufacturerElectop #ad
Part NumberCPUCOOL-1-10-4P
Model4328444952

4. DEEP COOL

#ad

DeepCool Fan Hub Control 4PWM Fan Speed Supports Fan with 3Pin/4Pin Cooling FH-04

#ad
DEEP COOL #ad - 4-port fan hub. Double-sided adhesive Installation. Support Cable management. Support PWM function. Compatible with 3-pin/4-pin fans.
BrandDEEP COOL #ad
ManufacturerDeepcool #ad
Height3.4 Inches
Length2.5 Inches
Width1 Inches
Part NumberFH-04
ModelFH-04
Warranty1 Year

5. BUYMINERS.CA

#ad

Chassis Fan Hub CPU Cooling 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller Efficient Chassis Adhesive Computer Cooling System Dedicated Supply from PSU to Link Multiple Points

#ad
BUYMINERS.CA #ad - If you are unhappy for any reason, contact us for a full refund. The pwm fan hub then matches the power level for the other ports. Double-sided adhesive mounts the pc fan hub to any flat surface and the screw hole allows it to be fixed to the chassis.

Easy to install - just plug the sata fan controller into the motherboard and connect to the PSU. The red port on our pwm fan controller allows the operating system to adjust fan speed based on temps. Cooling when you need it - quiet when you don't. No frills, all function - strong wire connections and clean sleeving are part of our simple, cost effective design. Manages multiple fans - if your motherboard lacks fan interfaces, our pwm fan hub is the neat and tidy way to expand.

Take care during installation to avoid bending the pins and capacitor. The 12v fan controller accurately controls 4-pin fan speed from a single case input. Money back guarantee - all of our products are backed by a manufacturer's warranty, and we will go the extra mile to make things right.
BrandBUYMINERS.CA #ad
ManufacturerBUYMINERS.CA #ad
Part NumberFANHUBSATA
Model8541602516

6. YELLOW SAND SHELL

#ad

Chassis Fan Hub CPU Cooling | 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller | Dedicated Supply from PSU to Link Multiple Points

#ad
YELLOW SAND SHELL #ad - Step by step set-up you will receive 1 hub & 1 pwm connector in your package. You just plug the board into the cpu fan motherboard connection & CONFIGURATION Simple installation & then SATA for power. Installation & easy configuration, this fan splitter will work even if only connected to the psu with sata connector.

The other 9 black fan ports can NOT be adjusted in speed and will copy the power level of what the red port is at. Money back product warranty our product is backed up by manufacturer’s warranty so feel free to contact us for any query or information. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. Connect 1 fan to the red port on fan hub then connect remaining fans. Most efficient sata to fan adapter in 2019 managing multiple fans from a single case input has become easier for you now.

If your motherboard lacks fan interfaces, use this neat & speed up the fans up to the maximum speed. Please note 4 pin fan speed can be adjusted by temperature control as well. This pwm hub sata accurately controls fan speed, you can slow down & tidy way to add fans & the 4 pin at the same time to run multiple fans. Connect the power supply SATA cable to fan hub before you attach/stick it on the chassis. You then need to connect the fan hub’s PWM cable to the motherboard.
BrandYELLOW SAND SHELL #ad
ManufacturerYELLOW SAND SHELL #ad
Part NumberExcuty

7. Toptekits

#ad

2 Pack Toptekits Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Fan Hub SATA Controller,1 Female to 10 Male 4Pin Fan Hub Splitter Cable for 3Pin&4Pin PWM Cooling Fan

#ad
Toptekits #ad - Eva double-sided adhesive can be used to fix the hub in the chassis. Ide molex 1 to 10 way cooling fan splitter hub. Support pwM function fan automatic speed regulation.

The orange interface is the dedicated interface for CPU fan, these black interface are conventional PWM fan interface. Package includes: 1x toptekits 4pin interface 1 to 10 Way PCB Adapter, 1X Toptekits SATA interface 1 to 10 way PCB adapter. Toptekits computer/pc case fan controller power cable 1 Female to 10 Male 4Pin Fan Hub Splitter Cable for 3Pin&4Pin PWM Cooling Fan. Widely used for pc computer water cooling system. Pwm interface is connected to CPU FAN interface on motherboard by PWM cable. Designed for 12v 4-pin fan, support simultaneous starting of 10 channel 4-Pin fans, solving the problem of shortage of motherboard.
BrandToptekits #ad
ManufacturerToptekits #ad
Part NumberTKPCFCPC

8. Semetall

#ad

Semetall Chassis Fan Hub CPU Cooling 10 Way 12V PWM Connector 4 Pin 3 Pin Efficient PC Chassis Fan Controller System with Cable,Dedicated Supply from PSU to Link Multiple Points

#ad
Semetall #ad - Installion the installation method is very simple. Design the red interface is connected to the cpu fan, and the black interface is connected to the PWM fan interface. Be careful not to connect them incorrectly. Note:since the motherboard can only receive one speed signal, the remaining 9 conventional fan interfaces have PWM function, but no speed signal.

You can paste it in a flat and suitable position. Specification size:75. 6x48. 7 mm/2. 9x1. 9 inches l*w;max current: not exceed 1a for 1 way, not exceed 10a for total 10 ways;package weight:23g;package content: 1 Set1x Red Delicated CPU Fan Interface, 9x Black Conventional PWM Fan Interface, 1x 4 Pin IDE Power Interface and 1x PWM Interface for Connecting to CPU FAN Interface On Motherboard. Application applicable to 12v, the purpose is to expand the 4-pin fan 4-pin interface, 4-pin PWM fan or 3-pin fan on the motherboard, and to solve the shortcomings of the lack of motherboard fan interface.

The 3-pin fan does not have a PWM function, so its operating speed cannot be adjusted. The high-viscosity double-sided tape is attached to the back of the hub PCB. High function the connected 4-pin fan can be adjusted at the same time, and at the same time, but only when connected to the PWM interface can support speed measurement, the speed of the fan can be adjusted through temperature control.
BrandSemetall #ad
ManufacturerSemetall #ad
Part NumberDH112257

9. skineat

#ad

Chassis Fan Hub CPU Cooling | 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller | Dedicated Supply from PSU to Link Multiple Points

#ad
skineat #ad - Money back product warranty our product is backed up by manufacturer’s warranty so feel free to contact us for any query or information. Most efficient sata to fan adapter in 2019 managing multiple fans from a single case input has become easier for you now. We will go an extra mile to redress the situation at hand.

You just plug the board into the cpu fan motherboard connection & CONFIGURATION Simple installation & then SATA for power. The pwm interface is connected to cpu fan interface on motherboard by PWM cable & the red interface is dedicated for CPU fan. 3 pin fans may also be used but have no PWM function and will stay at it's fixed speed after inserting. You can fix the screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. You need to connect the sata & tidy way to add fans & expand fan interfaces designed for 12 V 4-pin fan.

Pwm fan controller temperature control the cpu port red port, would be the only port that can be controlled by the operating system. Installation & easy configuration, this fan splitter will work even if only connected to the psu with sata connector. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. Just in case the product falls short of your expectations in any manner, you can return it for a 100% refund. Step by step set-up you will receive 1 hub & 1 pwm connector in your package.
Brandskineat #ad
Manufacturerskineat #ad
Height0.39 Inches
Length0.39 Inches
Width0.39 Inches
Part Number088

10. skineat

#ad

Skineat Chassis Fan Hub CPU Cooling | 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller | Dedicated Supply from PSU to Link Multiple Points 2pack

#ad
skineat #ad - We will go an extra mile to redress the situation at hand. Money back product warranty our product is backed up by manufacturer’s warranty so feel free to contact us for any query or information. The pwm interface is connected to cpu fan interface on motherboard by PWM cable & the red interface is dedicated for CPU fan.

You then need to connect the fan hub’s PWM cable to the motherboard. You can fix the screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. Step by step set-up you will receive 1 hub & 1 pwm connector in your package. The other 9 black fan ports can NOT be adjusted in speed and will copy the power level of what the red port is at. Pwm fan controller temperature control the cpu port red port, would be the only port that can be controlled by the operating system. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations.

Connect 1 fan to the red port on fan hub then connect remaining fans. Most efficient sata to fan adapter in 2020 managing multiple fans from a single case input has become easier for you now. Just in case the product falls short of your expectations in any manner, you can return it for a 100% refund. Connect the power supply SATA cable to fan hub before you attach/stick it on the chassis. You just plug the board into the CPU fan motherboard connection & then SATA for power.
Brandskineat #ad
Manufacturerskineat #ad
Height0.04 Inches
Length0.04 Inches
Width0.04 Inches