Top 10 PCIe SATA Card 4 Port – RAID Controllers

As an Amazon Associate I earn from qualifying purchases.



6 Gbps SATA 3.0 Controller PCI Express Expression Card with Low Profile Bracket Support 4 SATA 3.0 Devices, JESOT SATA Card 4 Port with 4 SATA Cables

JESOT #ad - High performance - the 4 port sata controller based on Marvell 88SE9215 chip, more stable and wider compatible. Support system - the sata expansion card supports windows xp/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required.

Please note - you could make the system to boot from this sata card but non RAID. Efficient - you could add four 6gbps/s sata 3. 0 devices to your computer with the PCIe SATA card and 4 SATA cables. Port multiplier FIS-based and Command-based switching supported. For all pcs - our pcie to sata iii 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for pcie x1/ x4/ x8/ X16 slot. Support install Windows OS from Win10 PE. But if your motherboard has raid function, you could make a RAID with this SATA card. Backward compatible to 1. 5 gbps/s and 3 Gbps/s.
BrandJESOT #ad
ManufacturerJESOT #ad
Part NumberSATA CARD-01



LTERIVER PCIE to 4-Ports Serial ATA/SATA 3.0 Host Controller Card for Windows Server, XP,7,8.0,8.1,1032/64 Systems-4X 6Gbps Max SATA 3.0 None Raid Ports-Support AHCI and IDE Boot Up PCE-G2S4

LTERIVER #ad - Support sata iii speed 6gbps, sata ii speed 3gbps, sata 1 speed 1. 5gbps. Users can push the mode selector on the mode they need. Users need to check if pcs or Servers have at least one PCIE X1 slot on mother board before purchase.

4. Complies with serial ata revision 3. 0 Provide 4x sata iii 6gbps ports for PCs and Servers. 2. Based on asmedia asm1061sata iii serial ata advantage hci controller and asmedia ASM1093 SATA port multiplier. 1. The pce-g2s4 pcie to 4-ports none-raid sata iii 6gbps card will allow users add 4x sata iII ports on desktop PCs, servers, and NAS system for HDD/SSD storage expansion or boot use. 3. This model support windows system only, install the driver before add the SSD/HDD in system. 5. Pcie gen 2 x1 interface design, x4, x2, x8, will works on pcie x1, x16 slot. Pce-g2s4 was set default mode on AHCI, it also supports IDE mode or none boot mode.
ManufacturerLTERIVER Co.,Ltd #ad
Part NumberPCE-G2S4



IO CREST 4 Port SATA III PCI-e 3.0 x1 Expansion Card Non-Raid with Low Profile Bracket ASMedia 1064 SI-PEX40156

IO CREST #ad - Supports port multiplier FIS Based Switching or Command Based Switching. Supports native command queue ncq. Chipset: asmedia 1064. Sata ports are bootable. 4 internal sata 6gb/s ports. Compliant with serial ata Specification 3. 0 Hot plug and Hot Swap. Compliant with PCI-Express Specification v1. 0 .
BrandIO CREST #ad
ManufacturerSyba #ad
Height0.75 Inches
Length2.5 Inches
Weight0.25 Pounds
Width4.5 Inches
Part NumberSI-PEX40156
Warranty3 Year Warranty

4. FebSmart


FebSmart 4-Ports PCI Express to 6Gbps SATA 3.0 Expansion Card for PCs, NAS-Plug and Play on Windows, and Linux System-Marvell 88SE9215 Non-Raid PCIE SATA Controller FS-S4-Pro, MAC OS, Servers

FebSmart #ad - 1. The fs-s4-pro is a 4-ports pci express to 6 gbps sata 3. 0 expansion card. It allows users add 4X Non-Raid SATA 3. 0 storage hdd/ssd on desktop computers by PCIE X1 interface. 3. Backward compatible with SATA 1. X 1. 5gbps and SATA 2. X 3gbps. Plug and play on windows server 2019, 109. X, 1011. X, 2008, 1010 X, 1032/64bit, 2016, 2012r2, 10.5. X, 1013. X, 2008r2, 107. X, 2003r2, 108. X, 1012. X, 2012, 200332/64, 10.14. X, mac os 104. X, 7, windows xP, 10.6.
BrandFebSmart #ad
ManufacturerFebSmart Co.,Ltd #ad
Height0.71 Inches
Length4.72 Inches
Width2.6 Inches
Part NumberFS-S4-Pro

5. Rivo


Boot as System Disk, SATA Controller Expansion Card with Low Profile Bracket, 4 Port with SATA Card, Rivo PCIe SATA Card, Support 4 SATA 3.0 Devices, Non-Raid

Rivo #ad - Pcie 1x to 4 sata iii 6gbps interfaces; transfer speeds up to 6Gbps; backwards compatible with SATA 1. 0/2. 0 of 1. 5/3. 0gbps. Port multiplier fis-based and Command-based switching supported; Chipset: Marvell. Support native command queue ncq; support ide/ahci 1. 0 mode; compatible with SATA 6G, 3G and 1. 5g hard drives; support Hot Plug and Hot Swap. Pci-express v2. 0 also compatible with pci-express V1. 0, can be used on pcie X4 X8 X16 slots. Support windows xp/vista/7/8/sever 2008 R2/1032/64 bit and newer. Support raid model: raid0, raid1, raid10, and hyperduo.
BrandRivo #ad
ManufacturerShenzhen Runwo Technology Co., Ltd. #ad
Part Number1X D4



BEYIMIE PCIe SATA Card 4 Ports,6 Gbps SATA 3.0 PCIe Card,PCIe to SATA Controller Expansion Card,SATA 3.0 Non-Raid,Can be Used as System Boot Disk,Support SSD/HDD Hard Disk

BEYIMEI #ad - Support system: compatible with operating system win10 / Vista / WIN8 / win7 / XP / Linux. Not applicable to PCI. Support gen 1i, gen 2i, gen 2x, gen 1x, gen 2m, and Gen 3i.

High performance: 4-port sata controller based on Marvell 88SE9215 chip, more stable and widely compatible. Support hot swap. Support port-based multiplier FIS and command-based exchange. Transfer speed: it supports sata revision 3. 0 transfer speed up to 6 gbit/s, and compatible with SATA6G, and is backward compatible with SATA I/II, 3G and 1.5g hard drives. 4-port adapter card: you can use this pcie sata card to add 4 6Gb/s SATA 3. 0 devices to your computer. Compatible with all PCI-E slots. Backward compatible with 1. 5 gbps/s and 3 Gbps/s.
BrandBEYIMEI #ad
ManufacturerBEYIMEI #ad
Part NumberPCIE SATA Card 4 Ports



PCI to SATA Adapter Converter for Desktop PC,Support SATA Hard Drive .SATA Drive.4 sata Ports.SATA Driver., USECL 4 Ports PCI SATA Raid Controller Internal Expansion Card with Two Sata Cables

USECL #ad - You can have one raid 0 or 1 setup and two independent sATA drives two RAID 0 or 1 sets or a single RAID 0+1 set. Sata ports. Sil3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ.

This is plug the sata raid pci card into the pci slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length. The card comes with an optional raid utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports. This is pci for add four independent sata-i ports to your pci equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card. Note:it is pci card, NOT PCIE card.
BrandUSECL #ad
ManufacturerUSECL #ad
Height1.3 Inches
Length7.8 Inches
Width5.1 Inches
Part NumberSB



PCIe SATA Card 4 Port,Marvell 9215 Non-Raid 6Gbps PCI Express to SATA 3.0 Ports Expansion Controller ,Boot as System Disk, for Desktop PC Support SSD and HDD with Low Profile Bracket and 4 SATA Cable

MHQJRH #ad - Built in 4 sata3. 0 interfaces, supports sata rev 3. 0 transfer speeds up to 6. 0gbps and backwards compatible with SATA 1. 0/2. 0 of 1. 5/3. 0gbps. If your motherboard has RAID function, you could make a RAID with this adapter. With using the marvell 88SE9215 chip, improve this card more stable and compatible. Compatible with windows xp / 8 / nas / mAC / 7 / 10 / Linux OS. Connect four large capacity storage devices at the same time. You could make the system to boot from this adapter but non RAID. Pcie to sata 3. 0 4 port expansion card with a low profile Bracket and 4 SATA Cable.
BrandMHQJRH #ad
ManufacturerMHQJRH #ad
Height1.2 Inches
Length8 Inches
Width5 Inches
Part Number8541586952

9. Ableconn


PCIe AHCI SATA III 6Gbps RAID Controller Card Support HyperDuo SSD Tiering Marvell 88SE9230 Chipset, Ableconn PEX-SAT4R 4-Port SATA 6G PCI Express 2.0 Host Adapter

Ableconn #ad - Support on-the-fly AES 128/256-bit encryption. High quality. Fully RoHS compliant. Made in Taiwan. No driver installation is required on windows 10/8/7/Vista, Linux, Server 2012/2008, Mac OS X 10. X and later. Supports sata iii transfer speeds up to 6. 0 gbps; backward compatible with SATA I/II at 1. 5/3. 0gbps. Support port multiplier FIS-based and Command-based switching. Built with marvell 88se9230 Supports hardware raid 0, 10, 1, and HybridDrive modes powered by Marvell HyperDuo.
BrandAbleconn #ad
ManufacturerAbleconn #ad
Height0.7 Inches
Length2.7 Inches
Weight0.11 Pounds
Width2.3 Inches
Part NumberPEX-SAT4R



I/O Crest 4 Port SATA III PCI-e 2.0 x2 HyperDuo RAID Hard Drive Controller Card Marvell 9230 Chipset

IO CREST #ad - Hyperduo is configured with at least 1 hard disk drive HDD and up to 3 solid state drives SSD. Pci-express x2 interface is compatible with PCI-Express x2, x8, x4, and x16 slots.

Support 3tb and 4tB GPT Hard drives. By embedding automated tiering technology into the chipset. Hyperduo is configured with at least 1 hard disk drive HDD and up to 3 solid state drives SSD. Raid mode supported: rAID 0/1/1+04 internal sata 6Gb/s Ports. Compatible with sata 6g, 3G and 1. 5g hard Drives. By embedding automated tiring technology into the chipset. Raid mode supported: rAID 0/1/1+0 Pci-express x1 interface is compatible with PCI-Express x2, x4, x8, and x16 slots.4 internal sata 6Gb/s Ports. Compatible with sata 6g, 3G and 1. 5g hard Drives. Does not support Hardware RAID using Port Multiplier. Chipset: marvell 88SE9230 .
BrandIO CREST #ad
ManufacturerIO Crest #ad
Height1.6 Inches
Length5.6 Inches
Weight0.34 Pounds
Width4.8 Inches
Part NumberSI-PEX40057
WarrantyOne year warranty