Top 10 Fan Hub PC – Computer Case Fans

As an Amazon Associate I earn from qualifying purchases.

1. ThreeBulls

#ad

ThreeBulls PWM Fan Hub, PC CPU Cooling 4 PIN/3PIN Fan Power Cable Hub Splitter Adapter Sleeved PWM Case Fan Splitter for 12V Desktop Computer Cooler Case Fans 1 to 5 Way 15.7 Inch

#ad
ThreeBulls #ad - Package contents: 1 black 15. 7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug. Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy.

Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans. Widely compatible: the cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans. Excellent 4-pin pwm 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.
BrandThreeBulls #ad
ManufacturerThreeBulls #ad
Part Number8541606340
Model8541606340

2. Electop

#ad

Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller

#ad
Electop #ad - Red is expected to be a pass through for the cpu fan. The ten fans will spin at the same speed, that designated by the system for that fan. There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Please note 4pin fan speed can be adjusted by temperature control.

If the chassis fan is configured in bios to run at 50%, the hub has a power source fed from the computer power supply, you will have 10 fans at 50%. For both 4-pin and 3-pin fans. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. Since the mainboard can only receive one rotation speed signal, but no speed signal. So, then the speed is regulated by the speed for the "source" fan. You can connect to the CPU fan lead on the system board or the chassis fan lead.

In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces.
BrandElectop #ad
ManufacturerElectop #ad
Part NumberCPUCOOL-1-10-4P
Model4328444952

3. DEEP COOL

#ad

Occupying only One 4-pin Motherboard Header, Powering up to 10 Fans 3-pin Non-PWM or 4-pin PWM, DEEPCOOL FH-10 Integrated Fan Hub

#ad
DEEP COOL #ad - That is, all pwm fans will run at the same DUTY RATIO. Only speed of Fan 1 can be identified by the system. If 3-pin non-pwm fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. Capable of connecting to 10 PC fans simultaneously for cooling the computer system. Velcro and screw mountings applicable for the tower interiors. If 4-pin pwm fans are connected to this fan hub, duty ratio of all pwm fans can be adjusted at the same time. They will run at FULL SPEED. Powered by a stable sata connection to the system PSU for up to 10 fans.
BrandDEEP COOL #ad
ManufacturerDEEP COOL #ad
Height1.18 Inches
Length8.39 Inches
Width4.41 Inches
Part NumberFH-10
ModelDEEP COOL

4. BSTQ

#ad

PWM Fan Hub Splitter for 4 Pin and 3 Pin Fans, PC Case Fan Extension Power Cable 5-Port(Can Light up LED RGB Color Cable)

#ad
BSTQ #ad - Port connector support 4-pin and 3-pin fan cables, 3-pin fan does not have speed control function. Extension cable has rGB color effect, 7 fixed colors, 3 color changing modes. Magnet adsorption and 3M adhesive can be used anywhere in your computer case. 5-port 4-pin pwm fan hub can run 1pcs CPU fan + 4pcs case fans at the same time. Compact size is only 1 inch w x 07 inch H x 3. 2 inch d cable length 13. 4 inch.
BrandBSTQ #ad
ManufacturerBSTQ #ad
Part NumberBQ-FAN/HUB

5. SilverStone Technology

#ad

SilverStone Technology Silverstone 8-Port PWM Fan Hub/Splitter for 4-Pin & 3-Pin Fans in Black SST-CPF04-USA Newest Version

#ad
SilverStone Technology #ad - Pwm 4pin header x 8, compatible with 3pin cable Speed control function is unavailable for 3 pin fans. Included 3m adhesive to apply anywhere within your case. Support speed detection for accurately controlling fans. Compact size at only 54mm w x 19mm H x 40mm D. 2200μf capacitor provides stable voltage. Attached 3 pin fans will run at maximum RPM. 1-to-8 pwm connectors.
BrandSilverStone Technology #ad
ManufacturerSilverStone Technology #ad
Height1.57 Inches
Length2.13 Inches
Width0.75 Inches
Part NumberSST-CPF04-USA
ModelSST-CPF04-USA
Warranty1 Year Parts and Labor

6. Fancasee

#ad

Fancasee 4-Pin PWM Fan Power Supply Cable 1 to 10 Splitter 10 Way Hub 15 Pin SATA Powered PC Case Internal Motherboard Fan Power Extension Cable Cord for ATX Computer Case 4-Pin and 3-Pin Cooling Fans

#ad
Fancasee #ad - Please be kindly noted that this 10 splitter pc case fan hub need to be connected with the 15-pin SATA power supply cable; And the PWM interface should be connected to CPU_FAN port on the motherboard with the dedicated cable in the package.

The 10 splitter 10 way extension hub offers greater flexibility between motherboard and cooling fans in the atx pc case. Excellent 1 to 10 splitter 10 way 4-pin pwm fan power supply extension hub, it provide a better power supply solution for atx PC computer case internal motherboard cooling fans & cpu fans. Plug-n-play, easy to use; 10 splitter 10 way 4 pin PWM pc case fan hub. Widely compatible: support 4-pin and 3-pin pc case fans cable; this 1 to 10 splitter 10 way fan power extension hub compatible with 4-pin and 3-pin pc case fans.
BrandFancasee #ad
ManufacturerFancasee #ad
Height0.39 Inches
Length3.94 Inches
Width1.97 Inches
Part NumberUS-CAB-81
ModelUS-CAB-81

7. DEEP COOL

#ad

DeepCool Fan Hub Control 4PWM Fan Speed Supports Fan with 3Pin/4Pin Cooling FH-04

#ad
DEEP COOL #ad - 4-port fan hub. Compatible with 3-pin/4-pin fans. Support PWM function. Double-sided adhesive Installation. Support Cable management.
BrandDEEP COOL #ad
ManufacturerDeepcool #ad
Height3.4 Inches
Length2.5 Inches
Weight5.19 Kilograms
Width1 Inches
Part NumberFH-04
ModelFH-04
Warranty1 Year

8. ID-COOLING

#ad

ID-COOLING FH-07 SATA Powered Fan Hub with 7 PWM Ports Hub Splitter for 4-Pin & 3-Pin Computer Internal Fans

#ad
ID-COOLING #ad - Clean & tidyblack sleeved nylon braided cable, more durable, and make the inside of the PC case looks more clean & tidy. 1-to-7 pwm fan hubthe fan hub splitter can support up to 7 fans.

Widely compatible the 1 to 7 splitter provides power supply and connectors for PC computer case internal fans. The extension cable offers greater flexibility between motherboard and CPU cooling fans. Easy installation double-sided adhesive on the back of the PCB board, which can be easily affixed to a flat place. Pwm functional fan adapterfan speed can be adjusted at the same time, only the speed of "Fan 1" can be identified by the system. Speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM.
BrandID-COOLING #ad
ManufacturerID-COOLING #ad
Part NumberFH-07

9. LEIHONG

#ad

SATA 1 to 8 Way12V 3 PIN Cooling Fan Splitter Controller Hub 3 Pin PWM for PC Desktop Computer Motherboard12V 3-Pin, Chassis Fan Hub

#ad
LEIHONG #ad - Easy installation:it is very easy to setup. 8 way without speed measurement and pwm function, you can manually adjust the gear position, start the fan at full speed LOW or low speed LOW, or turn off the fan.

It can be used to fix the hub in the chassis. Suit for 12v 3pin fan 8 channels. Using sata interface. Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire. Sata cooling fan splitter suit for 12v 3pin fan 8 channels. Using sATA interface. Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.

Connect your rgb items to the hub, connect the included cable to any pin on the hub then connect the other end to any RGB header on your motherboard and lastly connect a SATA cable from your PSU to the hub to provide power. Built-in double-sided adhesive: this compact HUB easily fits inside your pc case.
BrandLEIHONG #ad
ManufacturerLEIHONG #ad
Part NumberLH-084

10. TeamProfitcom

#ad

PWM Fan Hub PC 5 Way Splitter Sleeved PWM Fan Splitter Hub Adapter Cable for 12V Desktop Computer Cooler Case Fans 4-Pin & 3-Pin 14 inches 2 Pack TeamProfitcom

#ad
TeamProfitcom #ad - 14 inches -- 4 pin extension cable Link - https://www. Amazon. Com/dp/b085mjPFVC. Please note: do not exceed 12v 2a total output. Please check your devices specification when to use the PWM fan hub;Total product length: approx. Compatible with all 12v cPU and case fans with 4 pin or 3 pin connector;. Power up to 5 pc fans from a Single 4-Pin PWM Fan Header. Connector: 1 female 4-pin connector & 4 Male 4-pin Connectors1 for 12V CPU and 4 for case fans;.
BrandTeamProfitcom #ad
ManufacturerTeamProfitcom #ad
Part NumberBX0019-1415X
ModelBX0019-1415X