As an Amazon Associate I earn from qualifying purchases.
TP-Link #ad - 802. 3af poe compliant -tl-poe150s supplies power and data via one single ethernet cable to 802. 3af poe devices and expands network to areas with no power lines or outlets.
Plug and play installation-Easy setup with no software installation or configuration needed. High speed gigabit ports-experience lightning-fast wired speeds with 1× Gigabit Ethernet Input Port plus 1× Gigabit Ethernet Output port. Long range transmission-deliver power up to 100 meters 328ft.
TRENDnet #ad - Installation flexibility: This PoE+ injector has a wall-mountable design that accommodates most installations scenarios. Gigabit ports: 1 x gigabit ethernet port and 1 x PoE+ Gigabit Ethernet port. Gigabit speeds: full Duplex 2Gbps Ethernet speeds with this PoE+ injector.
BV-Tech #ad - Built-in power supply for All-in-One design uses standard included grounded AC cord. Up to 30w of power over ethernet. 100% satisfaction guarantee – 30-day Money-Back Guarantee with 1 Year Warranty.
Real HD #ad - Ubiquiti access point. Ieee802. 3af power over ethernet with 48V Power Supply. Compatible with most 10/100mbps ip camera, IP phone, Wireless IP point and other PoE devices.
Cudy #ad - For non-standard poe equipment, it will automatically detect and actively power off to protect the equipment. 30 watts poe + injector. Converts a non-poe gigabit port to a poe or poe + gigabit port and network a poe device located up to 100 meters 328 ft.
Gigabit ethernet speed. Away. This poe injector equiped with 1 gigabit Ethernet port input and 1 PoE + Gigabit Ethernet port output, which can offer up to 2Gbps full duplex Ethernet speeds. It can detect pOE equipment and non-POE equipment.
3at or 802. 3af standards, it will communicate with the equipment and provide appropriate power. Plug & play, accommodates most installations scenarios. Whether you want to use it with an ip camera in your home or work place, or use it to provide power and network to a wireless AP, a VoIP phone used in a conference room, no configuration is needed, simply connect a PoE network device, the POE150 is very suitable as long as your device is 802.3 af or 802. 3at standard.
Cudy #ad - Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios. High performance gigabit poe/poe+ injector, ieee 802.
3af/802. 3at compliant. Pin assignment and polarity: 1/2 -, 4/5+, 3/6 +, 7/8-. Auto-sensing technology delivers up to 802. 3at 60w to a poe+ device with backwards compatibility for 802.
Cudy #ad - Auto sensing technology delivers up to 30w to an 802. 3at poe+ device with backwards compatibility for 802. 3af poe 15. 4w devices. 1 gigabit ethernet port input and 1 PoE+ Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds.
ThePoEstore #ad - Sincere service: if you have any questions Or Want To Know More Products, Please Send An Email. Converts a non-poe gigabit port to a poe+ gigabit port And Network A Poe Device Located Up To 100 Meters 328 Ft.
Auto-sensing technology delivers up to 30w to an 802. 3at poe+ device with Backwards Compatibility For 802. 3af poe 15. 4w Device. 1 gigabit ethernet port input and 1 PoE+ Gigabit Ethernet Port Output.
iCreatin #ad - Compatible with tl-poe150s and most gigabit 802. 3af ip camera, ip phone, Wireless IP point and other PoE devices. This poe injector equiped with 1 gigabit Ethernet port input and 1 PoE Gigabit Ethernet port output, which can offer up to 2Gbps full duplex Ethernet speeds.
Compact and cost effective poe+ injector which offer multiple protection, over load protection, such as over current protection, over voltage protection and anti-interference protection.
Whether you want to use it with an ip camera in your home or work place, simply connect a PoE network device, this item is very suitable as long as your device is 802. 3af standard 48V PoE. Converts a non-poe gigabit port to a poe gigabit port and network a poe device located up to 100 meters 328 ft. Gigabit ethernet speed.
iCreatin #ad - Use with 12v ip security camera, wireless access point and other 12V devices. 12 volt power up to 30m/100ft via Ethernet, both data and power share the same cable.
1. TP-Link
#adTP-LINK 802.3af Gigabit PoE Injector | Convert Non-PoE to PoE Adapter | Auto Detects the Required Power, up to 15.4W | Plug & Play | Distance Up to 100 meters 328 ft. | Black TL-PoE150S
#adPlug and play installation-Easy setup with no software installation or configuration needed. High speed gigabit ports-experience lightning-fast wired speeds with 1× Gigabit Ethernet Input Port plus 1× Gigabit Ethernet Output port. Long range transmission-deliver power up to 100 meters 328ft.
More information #ad
Perfect for iP cameras or access point deployment in large areas. Gigabit speed support. Auto detect power-with auto detect technology, tl-PoE150S determines and delivers the exact power supply to your devices wiith up to 15. 4w power output. Convert non-poe to poe-with no need to replace your existing non-PoE switch/device, you can easily have PoE enabled with the use of TL-PoE150S.| Brand | TP-Link #ad |
| Manufacturer | TP-Link #ad |
| Height | 6.61 Inches |
| Length | 8.15 Inches |
| Weight | 0.66 Pounds |
| Width | 2.68 Inches |
| Part Number | TL-POE150S |
| Model | TL-POE150S |
| Warranty | 2 year - parts & labor |
More information #ad
2. TRENDnet
#adTPE-115GI, TRENDnet Gigabit Power Over Ethernet Plus Injector, Supplies PoE 15.4W Or PoE+ 30W Power Network Distances Up To 100M 328 ft., Black, Converts Non-Poe Gigabit To Poe+ Or PoE Gigabit
#adMore information #ad
Integrated power supply. Poe power supply: this gigabit poe+ injector supplies a PoE device with PoE 15. 4w or poe+ 30W power. Poe distance: this gigabit poe injector provides a PoE+ network connection up to 100 meters 328 ft.| Brand | TRENDnet #ad |
| Manufacturer | TRENDnet #ad |
| Height | 5 Inches |
| Length | 9 Inches |
| Weight | 0.36 Pounds |
| Width | 2 Inches |
| Part Number | TPE-115Gi |
| Model | TPE-115GI |
| Warranty | 3-year warranty |
More information #ad
3. BV-Tech
#adBV-Tech Gigabit Power Over Ethernet PoE+ Injector | 30W | 802.3 af/at | Plug & Play | up to 325 Feet
#adMore information #ad
1 poe port and 1 uplink port at 10/100/1000Mbps each. Surface or wall mount, can also be slotted side-by-side with multiple injectors.| Brand | BV-Tech #ad |
| Manufacturer | BV-Tech #ad |
| Height | 1.6 Inches |
| Length | 5.2 Inches |
| Weight | 0.75 Pounds |
| Width | 2.74 Inches |
| Part Number | POE-I100 |
| Model | POE-I100 |
| Warranty | 1 year warranty on parts and labor from date of purchase |
More information #ad
4. Real HD
#adFor Most Cisco / Polycom / Aastra Phones and More, Real HD 48V 24W 0.5A POE Injector Adapter Power Supply,10/100Mbps IEEE 802.3af Compliant, Up to 100M 328 Feet
#adMore information #ad
Remotely power poe device thru cat. 5, 6, 7 cable up to 328. 1 feet100 meters. Note: do not support passive 24V PoE device E. G. Input 100-240vdc, output: 48v 19W passive PoE Output.| Brand | Real HD #ad |
| Manufacturer | Real HD #ad |
| Model | POE Injector Adapter（24W） |
More information #ad
5. Cudy
#adPOE150, Cudy 30W Gigabit PoE+ Injector Adapter, Plug and Play, IEEE 802.3 at and IEEE 802.3 af Compliant, 10/100/1000Mbps RJ-45, up to 100 Meters 328 Feet
#adGigabit ethernet speed. Away. This poe injector equiped with 1 gigabit Ethernet port input and 1 PoE + Gigabit Ethernet port output, which can offer up to 2Gbps full duplex Ethernet speeds. It can detect pOE equipment and non-POE equipment.
More information #ad
If you have a PoE + 802. 3at or poE 802. 3at standard device, and need to use PoE technology to provide it with both network and power, this PoE adapter POE150 is your best choice. For poe equipment that meets 802. 3at or 802. 3af standards, it will communicate with the equipment and provide appropriate power. Plug & play, accommodates most installations scenarios. Whether you want to use it with an ip camera in your home or work place, or use it to provide power and network to a wireless AP, a VoIP phone used in a conference room, no configuration is needed, simply connect a PoE network device, the POE150 is very suitable as long as your device is 802.3 af or 802. 3at standard.
| Brand | Cudy #ad |
| Manufacturer | Shenzhen Cudy Technology Co., Ltd. #ad |
| Height | 1.5 Inches |
| Length | 4.76 Inches |
| Weight | 0.74 Pounds |
| Width | 1.97 Inches |
| Part Number | POE150 |
| Model | POE150 |
More information #ad
6. Cudy
#adIEEE 802.3af/802.3at Compliant, Up to 60W Ultra Power Supply, Metal housing, Not Support 802.3 bt/ PoE++/ Passive PoE, Cudy POE300 60W Gigabit Ultra PoE+ Injector, 10/100/1000Mbps Shielded RJ-45
#ad3af/802. 3at compliant. Pin assignment and polarity: 1/2 -, 4/5+, 3/6 +, 7/8-. Auto-sensing technology delivers up to 802. 3at 60w to a poe+ device with backwards compatibility for 802.
More information #ad
3at30w and 802. 3af poe 15. 4w devices. Not support 802. 3 bt/poe++ or any passive PoE devices. 1 gigabit ethernet port input and 1 PoE+ Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds. Converts a non-poe gigabit port to a poe+ Gigabit port and Network a PoE device located up to 100 meters 328 ft. Away.| Brand | Cudy #ad |
| Manufacturer | Shenzhen Cudy Technology Co., Ltd. #ad |
| Height | 1.73 Inches |
| Length | 6.61 Inches |
| Weight | 1.45 Pounds |
| Width | 2.91 Inches |
| Part Number | POE300 |
| Model | POE300 |
More information #ad
7. Cudy
#ad30W,10/100/1000Mbps RJ-45, up to 100 Meters 325 Feet, IEEE 802.3af / 802.3at Compliant, Cudy POE200 30W Gigabit PoE Injector Adapter
#adMore information #ad
Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios.30w gigabit poe injector adapter is IEEE 802. 3af/802. 3at compliant. Away. Converts a non-poe gigabit port to a poe+ Gigabit port and Network a PoE device located up to 100 meters 328 ft.| Brand | Cudy #ad |
| Manufacturer | Shenzhen Cudy Technology Co., Ltd. #ad |
| Height | 1.5 Inches |
| Length | 4.76 Inches |
| Weight | 0.74 Pounds |
| Width | 1.97 Inches |
| Part Number | POE200 |
| Model | POE200 |
| Warranty | 2 years warranty |
More information #ad
8. ThePoEstore
#adPoE Injector Adapter, Up to 100 Meters 325 Feet, PoE+ Injector 30W 10/100/1000Mbps IEEE 802.3af/at Compliant
#adAuto-sensing technology delivers up to 30w to an 802. 3at poe+ device with Backwards Compatibility For 802. 3af poe 15. 4w Device. 1 gigabit ethernet port input and 1 PoE+ Gigabit Ethernet Port Output.
More information #ad
Plug & play, no configuration is Needed, simply connect a poe network Device, Accommodates Most Installations Scenarios. Compact and cost-effective gigabit poe/poe+ injector, ieee 802. 3af/802. 3at Compliant. Please identify the seller ThePoEstore, the Quality of Other Products Cannot be Guaranteed.| Brand | ThePoEstore #ad |
| Manufacturer | ThePoEstore #ad |
| Height | 2.3 Inches |
| Length | 6.4 Inches |
| Weight | 0.65 Pounds |
| Width | 2.2 Inches |
| Part Number | ThePoE2020 |
| Model | 30W |
| Warranty | one year |
More information #ad
9. iCreatin
#adCompatible for TP-Link TL-POE150S, 48V 15.4W Power Over Ethernet, Gigabit POE Injector, TRENnet TPE-113GI, IEEE 802.3af Compliant, 10/100/1000Mbps
#adCompact and cost effective poe+ injector which offer multiple protection, over load protection, such as over current protection, over voltage protection and anti-interference protection.
More information #ad
Ieee 802. 3af compliant. Away. If you have a PoE 802. 3af standard device, and need to use PoE technology to provide it with both network and power. Plug & play, a voip phone used in a conference room, or use it to provide power and network to a wireless ap, no configuration is needed, accommodates most installations scenarios. Whether you want to use it with an ip camera in your home or work place, simply connect a PoE network device, this item is very suitable as long as your device is 802. 3af standard 48V PoE. Converts a non-poe gigabit port to a poe gigabit port and network a poe device located up to 100 meters 328 ft. Gigabit ethernet speed.
| Brand | iCreatin #ad |
| Manufacturer | iCreatin #ad |
More information #ad
10. iCreatin
#adUL Listed iCreatin 12V Power Over ethernet PoE Injector and PoE Splitter kit, Extension Power for 12 Volt 12 watt Devices with 5.5x2.1 mm DC Jack
#adMore information #ad
Support [email protected] network device, Transforms Non PoE devices to PoE enabled. Includes 12v 12watt power adapter UL listed power for the injector. For more ports items, please check our other amazon listings.| Brand | iCreatin #ad |
| Manufacturer | iCreatin #ad |
| Height | 2.3 Inches |
| Length | 5 Inches |
| Weight | 0.4 Pounds |
| Width | 3.6 Inches |
| Part Number | 8541553610 |
| Model | 8541553610 |
| Warranty | 1 year |
More information #ad
