Magpul Rifle Bipod, M-LOK, Black

#ad
Magpul Industries Corp MAGBP #ad - 3" to 10 Additionally, the mogul bipod has the exclusive ability to lock pan at 0 Degree while maintaining full Tilt functionality. The mogul bipod includes many features normally found on bipods at a significantly higher cost. Optimized for rapid one-handed adjustments; quickly and quietly transitions between countless user configurations.

Spring-tension legs stow neatly forward and snap down and lock into place with one hand; leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. Deploying and adjusting the Mogul bipod is quick and easy. The legs extend a full four inches, from 6.

Magpul Rifle Bipod, M-LOK, Black #ad - Rich with important features, our lightweight mil-spec hard anodized 6061 T-6 aluminum and Injection-molded polymer Bipod brings innovation in ergonomics, functionality, strength and value together.3". An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps.

In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. An industry-exclusive 50° of total tilt and 40° of total pan are Controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots.

Like all mogul products, The Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents.

#ad



Magpul M-LOK Polymer Picatinny Accessory Rail, 5 Slots

#ad
Magpul Industries Corp. MAG590-BLK #ad - Designed for use with all m-lok compatible mounting locations, vertical grips, M-LOK polymer rail sections provide a cost effective method of attaching various 1913 Pica tinny spec rail-mounted accessories such as lights, etc. Designed for use with all M-LOK compatible mounting locations. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, rail sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

Magpul M-LOK Polymer Picatinny Accessory Rail, 5 Slots #ad - Allows the attachment of various 1913 Pica tinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer mounting locations is included.

Beveled ends reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer mounting locations is included.

#ad



Magpul M-LOK QD Quick-Disconnect Sling Mount

#ad
Magpul Industries Corp. MAG606-BLK #ad - Beveled ends reduce snagging and eliminate sharp corners and edges. Beveled edges to reduce snagging; Anti-rotation design that prevents swivels from spinning. No modifications to the m-lok hand guard or forend is Required. All hardware necessary for attachment directly to M-LOK Slots is included. Designed for use with all M-LOK compatible mounting locations.

The m-lok qd sling mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from mil-spec anodized aluminum, The low-profile M-LOK QD Sling mount Features beveled edges to reduce snagging and has an Anti-rotation design that prevents swivels from spinning.

Magpul M-LOK QD Quick-Disconnect Sling Mount #ad - All hardware necessary for attachment directly to M-LOK Slots is included and and no modifications to the M-LOK hand guard or forend is required. Allows the attachment of various 1913 Pica tinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer mounting locations is included. Provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum.

#ad



Magpul M-LOK Bipod Mount

#ad
Magpul Industries Corp. MAG609-BLK #ad - Beveled edges to reduce snagging; Anti-rotation design that prevents swivels from spinning. Machined from milspec-anodized aluminum, the M-LOK Bipod mount also features beveled ends and corners to reduce snagging and sharp edges. The magpul m-lok bipod mount allows for the attachment of most Harris-Style stud mounted bipods to M-LOK compatible hand guards and forends.

Utilizes the direct-connect properties of the m-lok System; bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability. Max overall length of 2. 33 in. No modifications to the m-lok hand guard or forend is Required. Also compatible with other accessories that attach to traditional Sling studs.

Magpul M-LOK Bipod Mount #ad - Provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Machined from milspec-anodized aluminum; features beveled ends and corners to reduce snagging and sharp edges; All mounting hardware included.

Beveled ends reduce snagging and eliminate sharp corners and edges. The m-lok bipod mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market.

#ad



Magpul QD Quick-Disconnect Sling Swivel

#ad
Mapgul MAG540-BLK #ad - Allows for the attachment of most Harris-style stud mounted bipods to m-lok compatible hand Guards and forends. Combine with ms1 sling or with MS1 MS4 Adapter. Manganese-phosphate finished steel. Also compatible with other accessories that attach to traditional Sling studs. Compatible with QD sling attachment points.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer mounting locations is included. Machined from milspec-anodized aluminum; features beveled ends and corners to reduce snagging and sharp edges; All mounting hardware included. Manganese-phosphate finished steel. Low-profile, robust, and elegant mounting solution for the most common bipods on the market.

Magpul QD Quick-Disconnect Sling Swivel #ad - Designed for use with all M-LOK compatible mounting locations. Made in USA. Provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Allows the attachment of various 1913 Pica tinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight.

Beveled ends reduce snagging and eliminate sharp corners and edges. Push-button quick-detach sling swivel for 1-1/4" webbing, compatible with QD sling attachment points.

#ad



Vortex Optics Defender Flip Cap - Eyepiece E-10 40-46mm

#ad
Vortex Optics E-10 #ad - Beveled ends reduce snagging and eliminate sharp corners and edges. 8 inches. Dope disk NOT included. The e-10 fits all vortex riflescopes except the 1-inch tube viper model VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC. Outside diameter: 41. The second at a 45 and the third at 90 to lay flat back. 81 inches designed for use with all M-LOK compatible mounting locations.

Provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Also compatible with other accessories that attach to traditional Sling studs. Machined from milspec-anodized aluminum; features beveled ends and corners to reduce snagging and sharp edges; All mounting hardware included.

Vortex Optics Defender Flip Cap - Eyepiece E-10 40-46mm #ad - The e-10 fits all vortex riflescopes except the 1-inch tube Viper model VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC. Utilizes the direct-connect properties of the m-lok System; bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability.

57-1. The vertical position is for inserting your dope disk in to have easy access to while shooting. This is the last flip cap you will ever need. 6-1.

#ad



Height 1.26 inches - Vortex Optics Precision Matched Rings 34mm

#ad
Vortex Optics PMR-34-126 #ad - Will only work with Picatinny spec mounts-will not work with Weaver mounts. Our precision matched rings are kept in pairs throughout the manufacturing process - ensuring perfection from one set to another. We start with certified usa 7075 t6 billet aluminum and hold it to an extremely tight tolerance of. 0005 using our precision Computer Numeric Controlled CNC mill.

These vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize. Sold two rings per package. Push-button quick-detach sling swivel for 1-1/4" webbing. Low-profile, robust, and elegant mounting solution for the most common bipods on the market. Also compatible with other accessories that attach to traditional Sling studs.

Height 1.26 inches - Vortex Optics Precision Matched Rings 34mm #ad - All hardware necessary for attachment directly to M-LOK Slots is included. The vertical position is for inserting your dope disk in to have easy access to while shooting. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer mounting locations is included. No modifications to the m-lok hand guard or forend is Required.

8 inches. Beveled edges to reduce snagging; Anti-rotation design that prevents swivels from spinning.

#ad



Vortex Optics Riflescope Bubble Level 30-mm

#ad
Vortex Optics BL30 #ad - Machined from Mil-Spec anodized aluminum. Also compatible with other accessories that attach to traditional Sling studs. Allows for the attachment of most Harris-style stud mounted bipods to m-lok compatible hand Guards and forends. Available for 35mm, 34mm, 30mm, and 1-inch riflescope tubes. Made in USA. Push-button quick-detach sling swivel for 1-1/4" webbing.

Provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Hex wrench included. Designed to maximize accuracy, our bubble level makes it easy to maintain a perfect horizontal hold during extreme-range shooting. No modifications to the m-lok hand guard or forend is Required.

Vortex Optics Riflescope Bubble Level 30-mm #ad - 5-46 mm | 1. 8 inches. Low-profile, robust, and elegant mounting solution for the most common bipods on the market. Beveled ends reduce snagging and eliminate sharp corners and edges. Made in the USA. These vortex precision matched rings position the center of the riflescope tube at a height of 1. 26 inches 32.

0 mm from the base.

#ad



Caldwell Pic Rail Adaptor Plate with Durable Construction and Picatinny Rail Attachment for Outdoor, Range, Shooting and Hunting

#ad
Battenfeld Technologies 156716 #ad - Designed for use with all M-LOK compatible mounting locations. Compatible with QD sling attachment points. Beveled ends reduce snagging and eliminate sharp corners and edges. 6-1. Made in USA. All hardware necessary for attachment directly to M-LOK Slots is included. Made in the USA. Use on 30-mm riflescope tube for the most precise long-range shooting.

Use the bubble level to ensure that the rifle is perfectly vertical. This will eliminate potential error caused by shooting a canted rifle. Mounts quickly and easily to the riflescope tube. Dimensions: 3" L. Hex wrench included. Provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings.

Caldwell Pic Rail Adaptor Plate with Durable Construction and Picatinny Rail Attachment for Outdoor, Range, Shooting and Hunting #ad - . Also compatible with other accessories that attach to traditional Sling studs. Will only work with Picatinny spec mounts-will not work with Weaver mounts. Our precision matched rings are kept in pairs throughout the manufacturing process - ensuring perfection from one set to another. We start with certified usa 7075 t6 billet aluminum and hold it to an extremely tight tolerance of.

0005 using our precision Computer Numeric Controlled CNC mill.

#ad



Medium Height 0.97 Inches | 24.6 mm - 2 Pack - Vortex Optics Tactical 30mm Riflescope Ring

#ad
Vortex Optics #ad - 6-1. The vertical position is for inserting your dope disk in to have easy access to while shooting. Durable: constructed of lightweight, machined aluminum to ensure a reliable hold that will not rattle loose under heavy recoil. Will only work with Picatinny spec mounts-will not work with Weaver mounts. Our precision matched rings are kept in pairs throughout the manufacturing process - ensuring perfection from one set to another.

We start with certified usa 7075 t6 billet aluminum and hold it to an extremely tight tolerance of. 0005 using our precision Computer Numeric Controlled CNC mill. These vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize. Sold two rings per package.

Medium Height 0.97 Inches | 24.6 mm - 2 Pack - Vortex Optics Tactical 30mm Riflescope Ring #ad - Mounted to a picatinny rail, the wide, 6-screw tactical ring offers solid support for 30mm riflescope tubes. 8 inches. Made in the USA. These vortex precision matched rings position the center of the riflescope tube at a height of 1. 26 inches 32. 0 mm from the base. Also compatible with other accessories that attach to traditional Sling studs.

#ad



Magpul Hunter/SGA Cheek Riser Kit, Black, High

#ad
Magpul Industries Corp. MAG461-BLK #ad - Durable: constructed of lightweight, machined aluminum to ensure a reliable hold that will not rattle loose under heavy recoil. 5-46 mm | 1. Allows for the attachment of most Harris-style stud mounted bipods to m-lok compatible hand Guards and forends. Ease of use: quick install by mounting to the sling swivel stud of the handguard and utilizing the integrated fasteners for a secure attachment and includes a T20 screw for setting vertical angle.

Magpul Hunter/SGA Cheek Riser Kit, Black, High #ad - 6-1. Provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. The hunter/sga cheek riser kit is designed for use with the magpul hunter X-22, Hunter 700L, SGA Shotgun Stocks, Hunter 700, Hunter X-22 Takedown, and Hunter American stocks. It allows the user to configure their firearm with the ideal cheek piece height to accommodate a wide range of sight/optic configurations and shooter preferences.

Beveled ends reduce snagging and eliminate sharp corners and edges. Dope disk NOT included. The e-10 fits all vortex riflescopes except the 1-inch tube viper model VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC. Outside diameter: 41. 8 inches. Designed for use with all M-LOK compatible mounting locations.

#ad