Drill Clamp for 1ELH1 Shear

#ad
Malco TSDC #ad - Made of strong but lightweight aluminum. Made in the USA. Compatible with all current and pre-existing Malco TurboShear drill attachments. The drill clamp fits most 1200 rpm or larger cordless or a/c drills to make cutting with the turboshear model Ts1 a one-handed operation. Fits most 1200 rpm or larger cordless or A/C drills.

The tsce drill clamp and ts1 turboshear combination can be repositioned upside down as required for even greater maneuverability when cutting across a large expanse of material or through mild profiles Makes cutting with the TurboShear model TS1 a one-handed operation. Rails of the drill clamp are easily attached to the TS1 TurboShear, and positioned over the body of the drill.

Drill Clamp for 1ELH1 Shear #ad - Made of strong but lightweight aluminum, the rails of the TSDC drill clamp are easily attached to the Ts1 and positioned and tightened over the body of a drill.

#ad



Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment

#ad
Malco TS1XXX #ad - Heavy-duty, attachment inserts into chuck of 3/8" Or 1/2" Drills. Made in the USA. Tsdc drill clamp can be purchased separately. Turns your power drill into a power shear. This product is manufactured in United states. Inserts into chuck of an A/C or cordless drill. Navigates tight patterns and square cuts. Ideal for cutting in ferrous and nonferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, and ductwork.

Offset design keeps both hands away from work surface. Turbos hear. Cuts straight and to the left, up to 20-Gauge galvanized steel. This product meets customer requirement. Heavy-duty, attachment inserts into chuck of 3/8" Or 1/2" Drills. 20 gauge capacity in galvanized steel.

#ad



Malco HC1 2-Inch-to-12-Inch Sheet Metal Hole Cutter Accessory for 1/4-Inch or Larger Drill

#ad
Malco HC1 #ad - Turns your power drill into a power shear. 20 gauge capacity in galvanized steel. Commonly used by HVACR and Roofing Professionals. Made in the USA. Made in the USA. This hole cutter installs into the chuck of a standard electric drill as small as 1/4-inch. This 20-gauge capacity Malco sheet metal hole cutter comes with replaceable cutting bits.

It stores easily in a tool box and features a lightweight aluminum frame and high-speed bearings at the top and bottom of the drill shaft to assure perfect cutting balance and long cutting life. Inserts into chuck of an A/C or cordless drill. High-speed bearings assure perfect cutting balance and a long cutting life.

Malco HC1 2-Inch-to-12-Inch Sheet Metal Hole Cutter Accessory for 1/4-Inch or Larger Drill #ad - The malco 2-inch-to-12-inch sheet Metal Hole Cutter Accessory adjusts for cutting varying size holes in galvanized sheet metal. Installs into the chuck of a standard electric drill as small as 1/4-inch. Tsdc drill clamp can be purchased separately. Navigates tight patterns and square cuts. Cuts 2"-12" 51-305 mm holes in sheet metal including up to 20 gauge galvanized steel.

Combination English/Metric diameter gauge.

#ad



DEWALT Metal Shears Attachment, Impact Ready DWASHRIR

#ad
Dewalt DWASHRIR #ad - This tool features a 360 degree swivel head that allows for maneuverability when cutting. Commonly used by HVACR and Roofing Professionals. Installs into the chuck of a standard electric drill as small as 1/4-inch. Tsdc drill clamp can be purchased separately. Combination English/Metric diameter gauge. Attachment only, drill not included.

High-speed bearings assure perfect cutting balance and a long cutting life. 20 gauge capacity in galvanized steel. Connects via standard 1/4-inch hex shank. Inserts into chuck of an A/C or cordless drill. Cuts 2"-12" 51-305 mm holes in sheet metal including up to 20 gauge galvanized steel. Turns your power drill into a power shear.

DEWALT Metal Shears Attachment, Impact Ready DWASHRIR #ad - Navigates tight patterns and square cuts. 360 degree swivel head for maneuverability. Connects via standard 1/4-inch hex shank. Made in the USA. Made in the USA. The dewalt dwashrir impact ready shears attachment is able to cut up to 18GA material including but not limited to: Sheet metal, vinyl siding, duct, steel mesh, wire, plastics, corrugated sheet metal, asphalt shingles, cardboard and rubber.

#ad



Malco MSHC 1/4 & 5/16 Reversible Hex Chuck Driver

#ad
Malco MSHC #ad - Cuts 2"-12" 51-305 mm holes in sheet metal including up to 20 gauge galvanized steel. 360 degree swivel head for maneuverability. The removable, reversible socket also allows easy access for cleaning the magnet tip to eliminate any troublesome buildup of metal shavings in the hex opening. The number mshc reversible hex chuck driver is ideal for pairing with Malco zip-in Self-Piercing or bit-tip drill and tap metal screws.

Tested one-piece driver strength. This unique, exclusive, double-duty chuck driver ensures that popular 1/4-inch and 5/16-inch magnetic hex drives are always at hands reach. Connects via standard 1/4-inch hex shank. High-speed bearings assure perfect cutting balance and a long cutting life. Made in the USA. Ideal for use with Malco zip-in and bit-tip screws.

Malco MSHC 1/4 & 5/16 Reversible Hex Chuck Driver #ad - Made in the USA. 20 gauge capacity in galvanized steel. The dual-sided hex socket fits over a 1/4-inch magnet-tipped, ball-detent locking hex shaft and is quickly reversed for changing sizes. Combination English/Metric diameter gauge. Navigates tight patterns and square cuts. Tested torque of the socket and shaft is equal to comparable one-piece single size drivers to ensure optimum screw performance.

#ad



Crescent Wiss 12" Folding Tool - WF12

#ad
Wiss WF12 #ad - Compatible with most 18V-20V impact driver and drills. 360 degree swivel head for maneuverability. Ideal for folding drive cleat channels with-3/8-inch Depth To Make Longer, Wider Folds In Register Boots, End Caps, Plenums, Etc. Easy-clean magnet. Navigates tight patterns and square cuts. Constructed of heavy 16-gauge steel That Keeps Folding Channels From Widening And Ensures Precise And Accurate Bends.

Crescent Wiss 12" Folding Tool - WF12 #ad - Turns your power drill into a power shear. Inserts into chuck of an A/C or cordless drill. Reversible 1/4" & 5/16" hex socket. Tsdc drill clamp can be purchased separately. Installs into the chuck of a standard electric drill as small as 1/4-inch. Description: wiss 12-inch folding Tool Folding Channel Depths:-3/8-Inch and 1-Inch.

High-speed bearings assure perfect cutting balance and a long cutting life. Commonly used by HVACR and Roofing Professionals. Commonly used for folding Channels And Making Long Uniform Bends In Sheet Metal. Able to cut up to 18GA material. Tested one-piece driver strength.

#ad



MILWAUKEE 48-11-1880 M18 REDLITHIUM HIGH OUTPUT 18v 8.0 Ah Lithium-Ion Battery Pack

#ad
Milwaukee Electric Tools 48-11-1880 #ad - Navigates tight patterns and square cuts. Connects via standard 1/4-inch hex shank. Able to cut up to 18GA material. Easy-clean magnet. Constructed of heavy 16-gauge steel That Keeps Folding Channels From Widening And Ensures Precise And Accurate Bends. Ideal for use with Malco zip-in and bit-tip screws. High-speed bearings assure perfect cutting balance and a long cutting life.

MILWAUKEE 48-11-1880 M18 REDLITHIUM HIGH OUTPUT 18v 8.0 Ah Lithium-Ion Battery Pack #ad - Reversible 1/4" & 5/16" hex socket. Ideal for folding drive cleat channels with-3/8-inch Depth To Make Longer, Plenums, Wider Folds In Register Boots, End Caps, Etc. M18 redlithium high output xc8. 0 battery. For more information go to www. P65warnings. Ca. Gov. 360 degree swivel head for maneuverability. Installs into the chuck of a standard electric drill as small as 1/4-inch.

Made in the USA. Combination English/Metric diameter gauge. Tested one-piece driver strength.

#ad



Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment Shear

#ad
Malco TSHD #ad - Turboshear metal cutting attachment Shear, heavy duty, suitable for use with: 14. 4 v 3/8 in cordless or corded drill, steel, steel mesh, 16 mild/18 GA cutting capacity, metal roofing, galvanized, for ferrous and non-ferrous sheet metal, vinyl, ductwork and furnace jackets. High-speed bearings assure perfect cutting balance and a long cutting life.

3/8-inch and 1-inch depth folding Channel To Ensure Proper Depth Alignment. Capacity to cut 18 gauge galvanized steel and 20-gauge spiral duct. 20 gauge capacity in galvanized steel. Reversible 1/4" & 5/16" hex socket. Constructed of heavy 16-gauge steel That Keeps Folding Channels From Widening And Ensures Precise And Accurate Bends.

Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment Shear #ad - Tested one-piece driver strength. Turns your power drill into a power shear. Navigates tight patterns and square cuts. Easy-clean magnet. Commonly used by HVACR and Roofing Professionals. Combination English/Metric diameter gauge. Made in the USA.

#ad



ABN Sheet Metal Hand Seamer - 3 Inch Straight Jaw Manual Metal Bender Tool Sheet Metal Bending Pliers Flattening Tool

#ad
ABN #ad - Tested one-piece driver strength. Navigates tight patterns and square cuts. Manual hand seamers sheet metal tools: the abn 3 inch Hand Seamer Sheet Metal Bending Pliers Tool helps you to bend, stitch, and flatten sheet metal and non-ferrous metals without the need for heavy-duty power tools. Made in the USA.

Easy-clean magnet. Built to last: spring-loaded design and strengthened rivets gives an appropriately adjustable pressure and operating range to accommodate any metal-working or HVAC ductwork project; Durable steel construction adds maximum durability for heavy-duty applications; SGS, ISO, and CE certified.

ABN Sheet Metal Hand Seamer - 3 Inch Straight Jaw Manual Metal Bender Tool Sheet Metal Bending Pliers Flattening Tool #ad - Ideal for folding drive cleat channels with-3/8-inch Depth To Make Longer, End Caps, Plenums, Wider Folds In Register Boots, Etc. M18 redlithium high output xc8. 0 battery. Made in the USA. Navigates tight patterns and square cuts. Connects via standard 1/4-inch hex shank. For more information go to www. P65warnings.

#ad



Milwaukee 48-21-2000 One-Key Tick Tool and Equipment Tracker 4 Pack

#ad
Milwaukee #ad - Protection Tools and equipment take abuse on the job. The tick is designed specifically to survive in these conditions. The milwaukee tick tool and Equipment Tracker is the tool that tracks anything and survives everything. Combination English/Metric diameter gauge. Ideal for folding drive cleat channels with-3/8-inch Depth To Make Longer, Wider Folds In Register Boots, End Caps, Plenums, Etc.

M18 redlithium high output xc8. 0 battery. The tick features a 1 year runtime with replaceable coin cell battery Location Tracking Tracked by One-Key, the Tick tool and Equipment Tracker allows you to track the location of any item in your inventory, regardless of brand or type. Fits your needs: 1-1/4 by 3-inch 3.

Milwaukee 48-21-2000 One-Key Tick Tool and Equipment Tracker 4 Pack #ad - 2 by 7. 6cm jaw span provides a strong surface range for working; Bender jaw marked with 1. 4 inch. 6cm increments for precise bending measurements; Overall length of sheet metal bender tool is 8 inches 203cm. Compatible with most 18V-20V impact driver and drills. Ideal for various projects: use as a sheet metal duct bender for HVACR projects, as a steel roller bender and aluminum bending tool for roofing and siding construction, or a manual sheet metal folding tool for metal-working art projects.

Easy-clean magnet.

#ad



3-Pack 1/4 & 5/16 x 2" Reversible Dual-Sided Hex Chuck Driver - MSHC

#ad
Unknown 3PK_MSHC #ad - Turns your power drill into a power shear. Manual hand seamers sheet metal tools: the abn 3 inch Hand Seamer Sheet Metal Bending Pliers Tool helps you to bend, stitch, and flatten sheet metal and non-ferrous metals without the need for heavy-duty power tools. Easy-clean magnet. Made in the USA. Connects via standard 1/4-inch hex shank.

Ideal for various projects: use as a sheet metal duct bender for HVACR projects, as a steel roller bender and aluminum bending tool for roofing and siding construction, or a manual sheet metal folding tool for metal-working art projects. Made in the USA. Installs into the chuck of a standard electric drill as small as 1/4-inch.

3-Pack 1/4 & 5/16 x 2" Reversible Dual-Sided Hex Chuck Driver - MSHC #ad - Capacity to cut 18 gauge galvanized steel and 20-gauge spiral duct. High-speed bearings assure perfect cutting balance and a long cutting life. Patent pending, double-duty chuck driver ensures that popular 1/4-inch and 5/16-inch magnetic hex drives are always at hands reach. Built to last: spring-loaded design and strengthened rivets gives an appropriately adjustable pressure and operating range to accommodate any metal-working or HVAC ductwork project; Durable steel construction adds maximum durability for heavy-duty applications; SGS, ISO, and CE certified.

Tested one-piece driver strength. Turns your power drill into a heavy duty power shear.

#ad